Distinctive moulding in a very large clear print that is easily read. Graduated -20 to 50°C and 0 to 120°F.
215mm plastic wall thermometer w
Distinctive moulding in a very large clear print that is easily read. Graduated -20 to 50ºC and 0 to 120ºF. Size: H215 x W38 x D8mm.
Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side.
Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side. Finished in black and fitted with rubber feet.
Pocket Test Thermometers, Spirit - Blue
Reversible plastic case thermometer - the clear body fits to the cap with a bayonet clip which allows
Pack of 10 Partial Immersion Initial™ Brand Thermometers with range -10°C to +110°C, length 150mm and Green Fill
Pack of 10 spirit filled thermometers, each 150mm long.
Large wall thermometer with clear black printed scale. Suitable for indoor and outdoor use. Also available in low range for use in colder situation
Its large scale is easily read and the alcohol filled column is set into the case. (-30°C to +50°C). Size: W130 x D76 x H380mm.
Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulo
Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic mineral or man made fibres. Thickness 4mm.
Pack of 10.
Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellul
Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.
Natural Gas Bunsen Burner - for use with Methane Gas Supply
Nickel-plated burner tube with rotatable air regulator and a cylindrical ri
Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.
Bottled Gas Bunsen Burner for use with LPG Gas Supply
Nickel-plated Bunsen burner with rotatable air regulator and a cylindrical rifled conne
Iron gauzes in a square,
Dimensions: 20 mesh. 125 x 125mm.
Square, 20 mesh. 125mm. Pack of 10.
Iron gauze in a square
Dimensions: 20 mesh. 150 x 150mm.
Square, 20 mesh. 150mm. Pack of 10.
Raised centre section, one end flat and bent up and other end formed into a scoop. Made from Stainless steel.
Raised centre section, one end flat and bent up and other end formed into a scoop.
Stainless steel, length: 140mm.
These spatulas have one end which is flat and the other end is spoon form. Made from Stainless steel.
One end flat, and the other end spoon form. Stainless steel. 210mm
Wooden splints, spills, for lighting burners or experiments such as testing for oxygen (glowing splint).
For lighting burners or testing for oxygen (glowing splint), etc. Supplied in bundles of approximately 1000 splints.
Three Prong Retort Clamp with PVC coated diecast jaw, with clamping tommy-bar screw through swivels, mounted on 13.5cm rod. of diameter 8 mm
Rubber-lined diecast jaws, with clamping tommy-bar screw-through swivels, mounted on a 135mm cast alloy rod.
Length: 250mm, jaw capacity: 90mm, diameter of shaft: 8mm.
Square Boss Head Clamp, Die Cast Alloy, up to 16mm Rods at right angles to each other.
Diecast alloy, accepts rods up to 16.5mm diameter at right angles to each other. Dimensions: 30 x 30 x 50mm.
Best quality red rubber. Shore hardness in range 46-55. Bottom diameter moulded on top face. Resistant to dilute acids, alkalis a
Best quality Red Rubber. Shore hardness in range 46-55. Bottom diameter moulded on top face.
• Bottom diameter: 13mm
• Top diameter: 16mm
• Length: 24mm
• Pack of 10
Size 13 stoppers are ideal to use with ...
-10°C to +110°C 155mm Total Immersion Spirit Filled Laboratory Thermometer.
Normal fillings are coloured re
Red Spirit Filled Thermometer - Total Immersion - 1
Dimensions: 155mm
-10°C to +110°C 155mm Total Immersion Spirit Filled Laboratory Thermometer
These spirit filled thermometers
General purpose spirit filled thermometer. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm.
Range: -10/110°C
Grad. °C: 1
Length: 155mm
A stainless steel tripod stand with a triangular top and plastic feet.
Dimensions:
Triangular top, stainless steel. Length of one side: 130mm, height: 200mm.
For laboratory burners.
• Internal diameter: 5mm
• External diameter: 8mm
• Length: 900mm
A cellulose based, selectively permeable material, in tube form, which can be used to demonstrate osmosis and dialysis separation techniques.
A cellulose based, selectively permeable material, in tube form, which can be used to demonstrate osmosis and dialysis separation techniques. Molecular weight cut off (MCO) 1200-1400. 14mm diameter.
Iron gauzes in a square shape with flat circular ceramic centre.
Asbestos free
Square, with flat circular ceramic centre.
-20°C to +110°C 305mm Total Immersion Spirit Filled Laboratory Thermometer
Specification:<
Length: 305mm
Dimensions: 305mm
Digital test waterproof thermometer probe (to IP65) with max/min memory and hold function. 120mm stainless steel waterproof thermometer probe. Supp
A waterproof pocket probe thermometer for measuring the temperature of liquids and soft solids, with max/min options;
• Range: -50°C to + 150°C
• Display resolution: 0.1°C
• Battery: 1 x 393A cell battery
• Stainless st...
Stainless steel Night Light stand. Ideal for experiments where candle heat is adequate.
Ideal for experiments where candle heat is adequate.
This bundle contains 5 Stands and 1 pack of Night Lights. Ideal for experiments where candle heat is adequate.
Buy 5 Stands and 1 pack of Night Lights Together
Quick and safe forehead strip thermometers using heat sensitive liquid encased in plastic film. Ideal for children and first aid kits. Supplied wit
Liquid crystal thermometer strip which indicates body temperature when placed on the forehead. Range: +35 to +40°C.
4 prong, cork lined, universal clamp on rod, 10.5cm maximum clamp opening.
Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flask
Cork Lined, Universal clamp on rod, 10.5cm maximum clamp opening.
• Clamp constructed of powder coated high grade aluminium alloy 4 prong cork lined clamp attached to stainless steel rod
• Maximum clamp opening is 10.5cm
• 14cm Stainless Steel Connect...
Pack of 30 Total Immersion Initial™ Brand Thermometers with range -10°C to +110°C, length 150mm and Green Fill
Stirring thermometers. Graduated -10 to 110ºC. Length 300mm. Filled with a specially developed non-toxic fluid. Kit contains 30 thermometers.
A pair of straight crucible tongs with jaws that are corrugated on the inside. They are made from an epoxy coated Iron.
Jaws corrugated inside. Epoxy coated Iron. 200mm.
A pair of bowed crucible tongs with jaws that are corrugated on the inside. They are made from an epoxy coated Iron.
Jaws corrugated inside. Iron. 150mm.
Jaws corrugated inside. Iron. 200mm.
Slotted base, steel with matt finish.
Slotted base, steel with matt finish. Accepts flat objects up to 13mm thickness.
Dimensions: 102 x 82mm. Mass: 600g.
With welded joints, plain stem Stainless steel Retort Closed Ring
With welded joints, plain stem diameter 8mm, length 140mm, internal diameter 55mm.
Glass alcohol lamp: spirit burner and plastic cap, with wick and wick holder.
Glass is sodalime
Glass burner and plastic cap, with wick and wick holder. Capacity: 100cm³, height: 105mm.
Pack of 10 Wicks for the Methylated Spirit Burner (spirit lamp).
10x10cm lengths
Pack of 10 splints that can be used with the Methylated Spirit Burner.
Plated mild steel, to fit retort bases.
Plated mild steel, to fit bases above. Screwed 10 x 1.5mm metric thread.
Plated mild steel, to fit retort stand bases
Plated mild steel, to fit bases above Screwed 10 x 1.5mm metric thread.
Cast alloy boss head with 2 slots at right angles to take rods up to 16mm diameter.
Cast alloy boss with 2 slots at right angles to take rods up to 16mm diameter. Dimensions: 120 x 30mm, length x diameter.
A pack of 10 triangles made from pipeclay stems and mounted on stout iron wire
On stout iron wire, pipeclay stems.
A mild steel tripod stand with a flat triangular top and plastic feet.
Triangular top. Length of side: 125mm, height: 200mm.
Economy clamps with four prongs made from a diecast aluminium alloy.
Economy, diecast aluminium alloy. Holds objects of diameter 6 to 95mm. (Please note that we reserve the right to supply these with or without cork lining).
Economy rod to fit on retort bases. Made from aluminium.
A through-hole is positioned above the shoulder for easy tightening of the rod with
610mm length, 10mm diameter with narrower 7.5mm thread to assure right angled, upright fit on bases. A through-hole is positioned above the shoulder for easy tightening of the rod with a tommy bar or screwdriver (not supplied).
Heavy Duty Powder Coated Bosshead for rods up to 16mm.
• Thicker than normal 7mm threaded clamping screws
• Thicker casting to support more load
• Accepts up to 16mm rods
• Made of high strength powder coated alloy
• All m...
Square Die Cast Alloy Bosshead, allows up to 15mm Rods.
Classic Die Cast Alloy Bosshead, up to 15mm Rods.
• Threaded metal one piece clamping screws
• Able to hold rods up to 15mm in diameter
• Holds rods orthogonal (90 degrees) to one another
• All metal constructions to carry heavy loads a...