Distinctive moulding in a very large clear print that is easily read. Graduated -20 to 50ºC and 0 to 120ºF. Size: H215 x W38 x D8mm.

Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side. Finished in black and fitted with rubber feet.

Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side. Finished in black and fitted with rubber feet.

Pocket Test Thermometers, Spirit - Blue

Pack of 10 spirit filled thermometers, each 150mm long.

Its large scale is easily read and the alcohol filled column is set into the case. (-30°C to +50°C). Size: W130 x D76 x H380mm.

Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic mineral or man made fibres. Thickness 4mm.

Pack of 10.

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

Square, 20 mesh. 125mm. Pack of 10.

Square, 20 mesh. 150mm. Pack of 10.

Raised centre section, one end flat and bent up and other end formed into a scoop.

Stainless steel, length: 140mm.

One end flat, and the other end spoon form. Stainless steel. 210mm

For lighting burners or testing for oxygen (glowing splint), etc. Supplied in bundles of approximately 1000 splints.

Rubber-lined diecast jaws, with clamping tommy-bar screw-through swivels, mounted on a 135mm cast alloy rod.

Length: 250mm, jaw capacity: 90mm, diameter of shaft: 8mm.

Diecast alloy, accepts rods up to 16.5mm diameter at right angles to each other. Dimensions: 30 x 30 x 50mm.

Best quality Red Rubber. Shore hardness in range 46-55. Bottom diameter moulded on top face.

• Bottom diameter: 13mm

• Top diameter: 16mm

• Length: 24mm

• Pack of 10

Size 13 stoppers are ideal to use with ...

Best quality Red Rubber. Shore hardness in range 46-55. Bottom diameter moulded on top face.

• Bottom diameter: 15mm

• Top diameter: 18mm

• Length: 24mm

• Pack of 10

Red Spirit Filled Thermometer - Total Immersion - 1

Dimensions: 155mm

General purpose spirit filled thermometer. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm.

Range: -10/110°C

Grad. °C: 1

Length: 155mm

Dimensions: 155mm

Triangular top, stainless steel. Length of one side: 130mm, height: 200mm.

For laboratory burners.

• Internal diameter: 5mm

• External diameter: 8mm

• Length: 600mm

For laboratory burners.

• Internal diameter: 5mm

• External diameter: 8mm

• Length: 900mm

A cellulose based, selectively permeable material, in tube form, which can be used to demonstrate osmosis and dialysis separation techniques. Molecular weight cut off (MCO) 1200-1400. 14mm diameter.

Square, with flat circular ceramic centre.

Pack of 10.

General purpose spirit filled thermometer. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm.

Range: -10/110°C

Grad. °C: 1

Length: 305mm

Dimensions: 305mm

A waterproof pocket probe thermometer for measuring the temperature of liquids and soft solids, with max/min options;

• Range: -50°C to + 150°C

• Display resolution: 0.1°C

• Battery: 1 x 393A cell battery

• Stainless st...

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.

Ideal for experiments where candle heat is adequate.

Buy 5 Stands and 1 pack of Night Lights Together

Liquid crystal thermometer strip which indicates body temperature when placed on the forehead. Range: +35 to +40°C.

Cork Lined, Universal clamp on rod, 10.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade aluminium alloy 4 prong cork lined clamp attached to stainless steel rod

• Maximum clamp opening is 10.5cm

• 14cm Stainless Steel Connect...

Stirring thermometers. Graduated -10 to 110ºC. Length 300mm. Filled with a specially developed non-toxic fluid. Kit contains 30 thermometers.

Jaws corrugated inside. Epoxy coated Iron. 200mm.

Jaws corrugated inside. Iron. 150mm.

Jaws corrugated inside. Iron. 200mm.

Slotted base, steel with matt finish. Accepts flat objects up to 13mm thickness.

Dimensions: 102 x 82mm. Mass: 600g.

With welded joints, plain stem diameter 8mm, length 140mm, internal diameter 55mm.

Glass burner and plastic cap, with wick and wick holder. Capacity: 100cm³, height: 105mm.

Pack of 10 splints that can be used with the Methylated Spirit Burner.

Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of 1 short side. Finished in black and fitted with rubber feet.

Plated mild steel, to fit bases above. Screwed 10 x 1.5mm metric thread.

Plated mild steel, to fit bases above Screwed 10 x 1.5mm metric thread.

Plated mild steel, to fit bases above. Screwed 10 x 1.5mm metric thread.

Cast alloy boss with 2 slots at right angles to take rods up to 16mm diameter. Dimensions: 120 x 30mm, length x diameter.

On stout iron wire, pipeclay stems.

Triangular top. Length of side: 125mm, height: 200mm.

Economy, diecast aluminium alloy. Holds objects of diameter 6 to 95mm. (Please note that we reserve the right to supply these with or without cork lining).

610mm length, 10mm diameter with narrower 7.5mm thread to assure right angled, upright fit on bases. A through-hole is positioned above the shoulder for easy tightening of the rod with a tommy bar or screwdriver (not supplied).