• Length of one side: 130mm
Pack of 1 "

Triangular top, stainless steel. Length of one side: 130mm, height: 200mm.

"

These spirit filled thermometers Pack of 1

General purpose spirit filled thermometer. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm.

Range: -10/110°C

Grad. °C: 1

Length: 155mm

Dimensions: 155mm

Normal fillings are coloured re Pack of 1

Red Spirit Filled Thermometer - Total Immersion - 1

Dimensions: 155mm

• Die casted alloy clamp with metal clamping screws Pack of 1 "

  Diecast alloy, accepts rods up to 16.5mm diameter at right angles to each other. Dimensions: 30 x 30 x 50mm.

  "

• Supplied in bundles of approxim Pack of 1 "

  For lighting burners or testing for oxygen (glowing splint), etc. Supplied in bundles of approximately 1000 splints.

  "

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flask Pack of 1 "

Cork Lined, Universal clamp on rod, 10.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade aluminium alloy 4 prong cork lined clamp attached to stainless steel rod

• Maximum clamp opening is 10.5cm

• 14cm Stainless Steel Connect...

• Length: 150mm.
Pack of 1

Jaws corrugated inside. Iron. 150mm.

• Length: 200mm.
Pack of 1

Jaws corrugated inside. Iron. 200mm.

Nickel-plated Bunsen burner with rotatable air regulator and a cylindrical rifled conne Pack of 1 "

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

• Capacity: 100cm³
• Height: 1 Pack of 1 "

  Glass burner and plastic cap, with wick and wick holder. Capacity: 100cm³, height: 105mm.

  "

• It is made from die casted alloy.
• It accepts Pack of 1 "

  Cast alloy boss with 2 slots at right angles to take rods up to 16mm diameter. Dimensions: 120 x 30mm, length x diameter.

  "

• Not suitable for applications requiring strong or direct heat.
Pack of 1 "

Economy, diecast aluminium alloy. Holds objects of diameter 6 to 95mm. (Please note that we reserve the right to supply these with or without cork lining).

"

A through-hole is positioned above the shoulder for easy tightening of the rod with Pack of 1 "

610mm length, 10mm diameter with narrower 7.5mm thread to assure right angled, upright fit on bases. A through-hole is positioned above the shoulder for easy tightening of the rod with a tommy bar or screwdriver (not supplied).

• Two wide pad metal screws make it easier to securely fasten the Boss Head to the Pack of 1 "

  Classic Die Cast Alloy Bosshead, up to 15mm Rods.

  • Threaded metal one piece clamping screws

  • Able to hold rods up to 15mm in diameter

  • Holds rods orthogonal (90 degrees) to one another

  • All metal constructions to carry heavy loads a...

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks a Pack of 1 "

Vinyl coated Extension Lab Clamp, 8.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy 3 finger vinyl coated clamp attached to stainless steel rod

• Maximum clamp opening is 8.5cm

• 14cm Stainless Steel Connecting Ro...

Suitable for beakers, Erlenmeyer flasks, test-tube Pack of 1 "

Vinyl Coated Extension Lab Clamp, 8.5cm maximum clamp opening attached to swivel bosshead.

• Clamp constructed of powder coated high grade zinc alloy, 3 finger vinyl coated clamp attached to swivel bosshead

• Maximum clamp opening is 8.5cm

• Swivel be...

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling Pack of 1 "

Corked Lined Burette, Flask, Beaker Clamp, 11 cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy 2 cork lined prongs attached to stainless steel rod

• Maximum clamp opening is 11cm

• 14cm Stainless Steel Connecting Ro...

Suitable for beakers, Erlenmeyer flasks, test-tubes, boi Pack of 1 "

Cork Lined, Clamp with swivel Bosshead, 11cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy. Clamp prongs (2) are cork lined

• Maximum clamp opening is 11cm

• Swivel between Clamp and Bosshead

• Boss a...

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and Pack of 1 "

Cork Lined Clamp with swivel Bosshead, 10.5 cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy. Clamp prongs (4) are cork lined

• Maximum clamp opening is 10.5cm

• Swivel between Clamp and Bosshead

• Bo...

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks Pack of 1 "

3 Finger, Vinyl Coated Extension Lab Clamp, 8.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy, 3 finger vinyl coated clamp

• Maximum clamp opening is 8.5cm

• 3 Vinyl Coated Clamp Fingers

• Completel...

Nickel-plated burner tube with rotatable air regulator and a cylindrical ri Pack of 1 "

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellul Pack of 1 "

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.

Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulo Pack of 1 "

Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic mineral or man made fibres. Thickness 4mm.

Pack of 10.

Large wall thermometer with clear black printed scale. Suitable for indoor and outdoor use. Also available in low range for use in colder situation Pack of 1

Its large scale is easily read and the alcohol filled column is set into the case. (-30°C to +50°C). Size: W130 x D76 x H380mm.

Reversible plastic case thermometer - the clear body fits to the cap with a bayonet clip which allows Pack of 1 "

Pocket Test Thermometers, Spirit - Blue

The BIC Megalighter Multi multipurpose lighter is great for all sorts of uses with an ingenious 6 cm extension wand to keep a controlled flame at a Pack of 1 "

BIC Mega Lighter, the ideal for catering and science labs' with a fixed flame and BIC gas reservoir in a small and modern shape. Easy storage with a retractable hook. Comfortable handling, provided by a curved handled design and easy and comfortable to light.

Similar to standard mo Pack of 1 "

Nickel plated burner tube with rotatable air regulator and cylindrical connector. Mounted on pressure die casted base, base diameter: 80mm.

This range of easy to read temperature labels are designed to be self-adhesive and provide the current temperature with an accuracy of +/- 1°C. The Pack of 1

Adhesive Temperature Indicators P10

Asbestos free Pack of 1 "

Square, with flat circular ceramic centre.

Pack of 10.

Specification:< Pack of 1

General purpose spirit filled thermometer. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm.

Range: -10/110°C

Grad. °C: 1

Length: 305mm

Dimensions: 305mm

**This is suitable for burner Pack of 1