Brand
Manufacturer
Order By
Filter

Easy to use digital oral thermometer suitable for all ages. This thermometer is the standard rigid probe model, suitable for oral use. Packaged in Pack of 1

Features small physical size and low mass, and the LCD digital display provides a rapid, unambiguous readout. An audible tone indicates completion of the measuring period and automatic switch-off takes place after ten minutes to conserve battery life.

• Measurement range: 32.0 ...

Add

A stainless steel tripod stand with a triangular top and plastic feet.

Dimensions:

Add
14mm Visking Tubing 30m Pack of 1 "

A cellulose based, selectively permeable material, in tube form, which can be used to demonstrate osmosis and dialysis separation techniques. Retains molecules of molecular mass; 12-14 x 10.

14mm diameter.

"
Add

-10°C to +110°C 305mm Partial Immersion Spirit Filled Laboratory Thermometer

These spirit filled thermometers use specially selected filling Pack of 1

General purpose spirit thermometers. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm. Immersion is 76mm.

Dimensions: 305mm

Add

Iron gauze in a square

Dimensions: 20 mesh. 150 x 150mm.

Pack of 10.

Pack of 1 "

Square, 20 mesh. 150mm. Pack of 10.

"
Add

Iron gauzes in a square,

Dimensions: 20 mesh. 125 x 125mm.

Pack of 10.

Pack of 1 "

Square, 20 mesh. 125mm. Pack of 10.

"
Add

Bottled Gas Bunsen Burner for use with LPG Gas Supply

Nickel-plated Bunsen burner with rotatable air regulator and a cylindrical rifled conne Pack of 1 "

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

"
Add

Digital test waterproof thermometer probe (to IP65) with max/min memory and hold function. 120mm stainless steel waterproof thermometer probe. Supp Pack of 1 "

A waterproof pocket probe thermometer for measuring the temperature of liquids and soft solids, with max/min options;

• Range: -50°C to + 150°C

• Display resolution: 0.1°C

• Battery: 1 x 393A cell battery

• Stainless st...

Add

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellul Pack of 1 "

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.

"
Add

Natural Gas Bunsen Burner - for use with Methane Gas Supply 

Nickel-plated burner tube with rotatable air regulator and a cylindrical ri Pack of 1 "

Nickel-plated burner tube with rotatable air regulator and a cylindrical riffled connector, mounted on an enamelled pressed-steel base. Burner tube: 100 x 13mm, height x diameter, base: 80mm diameter. Overall height: 140mm, connector: 10mm o.d.

"
Add

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellul Pack of 1 "

Calcium silicate bench mats which are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic, mineral or man made fibres. Thickness 4mm. Pack of 10.

"
Add

Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulo Pack of 1 "

Calcium silicate bench mats that are non-combustible and moisture/chemical resistant. Composed of a calcium silicate matrix reinforced with cellulose fibre. Contains no asbestos, inorganic mineral or man made fibres. Thickness 4mm.

Pack of 10.

"
Add

Large wall thermometer with clear black printed scale. Suitable for indoor and outdoor use. Also available in low range for use in colder situation Pack of 1

Its large scale is easily read and the alcohol filled column is set into the case. (-30°C to +50°C). Size: W130 x D76 x H380mm.

Add

4 prong, cork lined, universal clamp on rod, 10.5cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flask Pack of 1 "

Cork Lined, Universal clamp on rod, 10.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade aluminium alloy 4 prong cork lined clamp attached to stainless steel rod

• Maximum clamp opening is 10.5cm

• 14cm Stainless Steel Connect...

Add

With welded joints, plain stem Stainless steel Retort Closed Ring

Add

Glass alcohol lamp: spirit burner and plastic cap, with wick and wick holder.

Glass is sodalime

  • Capacity: 100cm³
  • Height: 1 Pack of 1 "

    Glass burner and plastic cap, with wick and wick holder. Capacity: 100cm³, height: 105mm.

    "
Add

Pack of 10 Wicks for the Methylated Spirit Burner (spirit lamp).

10x10cm lengths

Pack of 1

Pack of 10 splints that can be used with the Methylated Spirit Burner.

Add

Plated mild steel, to fit retort bases.

  • Screwed 10 x 1.5mm metric thread.
  • 500mm x 10mm
Pack of 1 "

Plated mild steel, to fit bases above. Screwed 10 x 1.5mm metric thread.

"
Add

Plated mild steel, to fit retort stand bases

  • Screwed 10mm x 1.5mm metric thread
  • Rod Dimensions: (L)600mm x (D)12.5mm
Pack of 1 "

Plated mild steel, to fit bases above Screwed 10 x 1.5mm metric thread.

"
Add

Plated mild steel, to fit retort bases.

  • Screwed 10 x 1.5mm metric thread.
  • 750mm x 12.5mm
Pack of 1 "

Plated mild steel, to fit bases above. Screwed 10 x 1.5mm metric thread.

"
Add

Cast alloy boss head with 2 slots at right angles to take rods up to 16mm diameter.

Add
Add

Economy clamps with four prongs made from a diecast aluminium alloy.

Add

Economy rod to fit on retort bases. Made from aluminium.

A through-hole is positioned above the shoulder for easy tightening of the rod with Pack of 1 "

610mm length, 10mm diameter with narrower 7.5mm thread to assure right angled, upright fit on bases. A through-hole is positioned above the shoulder for easy tightening of the rod with a tommy bar or screwdriver (not supplied).

"
Add

Square Die Cast Alloy Bosshead, allows up to 15mm Rods.

Add

3 finger Vinyl coated Extension Lab Clamp, 8.5cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks a Pack of 1 "

Vinyl coated Extension Lab Clamp, 8.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy 3 finger vinyl coated clamp attached to stainless steel rod

• Maximum clamp opening is 8.5cm

• 14cm Stainless Steel Connecting Ro...

Add

3 finger Vinyl coated Extension Lab Clamp on Swivel Bosshead, 8.5cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tube Pack of 1 "

Vinyl Coated Extension Lab Clamp, 8.5cm maximum clamp opening attached to swivel bosshead.

• Clamp constructed of powder coated high grade zinc alloy, 3 finger vinyl coated clamp attached to swivel bosshead

• Maximum clamp opening is 8.5cm

• Swivel be...

Add

2 prong, Cork Lined, Universal clamp on rod, 11cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling Pack of 1 "

Corked Lined Burette, Flask, Beaker Clamp, 11 cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy 2 cork lined prongs attached to stainless steel rod

• Maximum clamp opening is 11cm

• 14cm Stainless Steel Connecting Ro...

Add

Cork Lined, 2 prong Clamp with swivel Bosshead, 11cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boi Pack of 1 "

Cork Lined, Clamp with swivel Bosshead, 11cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy. Clamp prongs (2) are cork lined

• Maximum clamp opening is 11cm

• Swivel between Clamp and Bosshead

• Boss a...

Add

Cork Lined Clamp with swivel Bosshead, 10.5cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and Pack of 1 "

Cork Lined Clamp with swivel Bosshead, 10.5 cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy. Clamp prongs (4) are cork lined

• Maximum clamp opening is 10.5cm

• Swivel between Clamp and Bosshead

• Bo...

Add

3 Finger, Vinyl Coated Extension Lab Clamp, 8.5cm maximum clamp opening.

Suitable for beakers, Erlenmeyer flasks, test-tubes, boiling flasks Pack of 1 "

3 Finger, Vinyl Coated Extension Lab Clamp, 8.5cm maximum clamp opening.

• Clamp constructed of powder coated high grade zinc alloy, 3 finger vinyl coated clamp

• Maximum clamp opening is 8.5cm

• 3 Vinyl Coated Clamp Fingers

• Completel...

Add

Best quality red rubber.  Shore hardness in range 46-55.  Bottom diameter moulded on top face.  Resistant to dilute acids, alkalis a Pack of 1

Includes packs of 10 stoppers of the following sizes:

• Solid 13 x 16

• Solid 19 x 22.5

• One hole 19 x 22.

• Solid 31 x 36

• Two hole 31 x 36mm

Pack of 50.

Add

-10°c to +110°c 205mm Total Immersion Spirit Filled Laboratory Thermometer

This spirit filled thermometer uses specially selected filling mat Pack of 1

General purpose spirit thermometers. White enamelled back with reinforced bulbs. Supplied with non-roll fitting. Diameter: 6.5mm. Immersion is total.

Dimensions: 205mm

Add

Square Boss Head Clamp, Die Cast Alloy, up to 16mm Rods at right angles to each other.

Add
Products Per Page:
Bigalogue 2022
Consumables
Powered By ECIHorizon v4.90.0.5 20260127 490.0130